Another Motherhood
$12.99
$12.99
4,400+ reviews on the Shop app
24.5" × 36"Whole gang sheet
Cut & pressReady to press
300°FHot or cold peel
“Love them very nice quality”
Shop app review, pre-made transferMore Mama & Mom sheetsSee all →
Quick pick:
Why U Press DTF
- Printed on commercial DTF printers
- High-quality inks, films & powders
- Peel hot or cold, whichever you like
- What you get: the whole Another Motherhood gang sheet (24.5" × 36"), printed and ready to press.
- Sizes: every design prints at the size you see on the sheet. Check the measurements on the main photo.
- Using it: cut the designs apart and press each one on its own.
- Pressing: 300°F with heavy pressure, 8–12 seconds for hot peel or 12–15 seconds for cold peel. Step-by-step instructions are further down this page.
- Photos: the U Press watermark on the preview pictures is for online protection only and is not printed on your transfer.
Want your own mix or different sizes? Build a HiFi gang sheet →Full pressing instructions page →
Press it right
How to press your DTF transfer
- 300°F
- Heavy pressure
- Hot or cold peel
Hot peel 8–12 sec
- Heat your press to 300°F
- Pre-press the shirt 3–5 seconds to remove wrinkles and moisture
- Line up your transfer
- Press with heavy pressure for 8–12 seconds
- Peel the backing right away in one quick motion
- Press again for 5 seconds with parchment paper or Teflon
Cold peel 12–15 sec
- Heat your press to 300°F
- Pre-press the shirt 3–5 seconds to remove wrinkles and moisture
- Line up your transfer
- Press with heavy pressure for 12–15 seconds
- Let it cool, then peel the backing
- Press again for 5 seconds with parchment paper or Teflon
Every heat press is a little different. Start with these settings and adjust for the finish you like. Try different papers or fabrics on the second press for your favorite feel.
Using your gang sheet
One sheet, lots of designs. Here's how to get the most from it.
- Every design prints at the size you see on the sheet
- Cut the designs apart before pressing
- Press each one at 300°F, hot or cold peel
- Keep extra designs flat in a cool, dry place for later
Care
Keeps your print bright and flexible, wash after wash.
Washing
- Wait 24–48 hours before the first wash
- Use cold water
- Use a soft detergent
- Turn the shirt inside out
- Skip fabric softener
- No bleach
- Separate lights and darks
Drying & ironing
- Air dry if you can
- Use the lowest dryer heat
- Don't over-dry
- Don't iron directly on the print
Shipping & turnaround
Printed fresh for every order, then packed and shipped.
Right now
- Ships within the Current TAT shown at the top of the site
- TAT is business days to prepare, print and shipTransit time is added after it ships
- Track your order any timeSee which step your order is on
- Need it sooner? Add Rush PrintingJumps to the front of the line, printed same or next business day