
UV DTF Upload Sheet
22.5″ × 12″ sheet · $8.00
Upload your finished gang sheet and we print it as UV DTF: peel-and-stick transfers for cups, tumblers, glass, wood, plastic, metal and other hard surfaces. No heat press needed.
Pick your sheet lengthEvery UV sheet is 22.5″ wide
Every UV sheet is 22.5 inches wide. Choose the length that matches your file.
Upload your finished 22.5″ × 12″ file below.
Check your file, set the quantity and add it to your cart.
- File is a ready-to-print, arranged gang sheet
- Exactly 22.5″ wide × 12″ tall (required)
- 300 DPI recommended
- Transparent background
- We print it exactly as you send it: check spelling, sizes and edges
Upload your finished sheet
Click Choose File below and pick your file.
Your artwork is attached to your order and printed exactly as submitted.
“Amazing color and fast delivery... my customers will be happy.”
Shop app reviewApply it right
How to apply UV DTF
- No heat press
- Peel & stick
- Hard surfaces only
Apply 5 steps
- Clean the surface with rubbing alcohol and let it dry completely.
- Peel off the backing paper. The design stays on the clear top film.
- Place it and rub it down. Press from the center out, then rub firmly over the whole design for 30–60 seconds with a squeegee or your fingers.
- Peel the clear film slowly at a low angle. If any part lifts, lay the film back down and rub again.
- Let it set for 24 hours before washing or heavy use.
For best results
- Apply at room temperature, not on a hot or cold surface
- Firm pressure is the key: rub harder than you think
- Don't touch the sticky side of the design
- Smooth, flat or gently curved surfaces work best
- Store unused designs flat, away from heat and sunlight
- Wrapping a cup? Line up the edge of the wrap with the seam on the side of the cup so it goes on straight, then smooth it around the cup as you go
UV DTF is made for hard surfaces. It is not for fabric or clothing.
Works on
- Glass cups, tumblers & mugs
- Ceramic & metal
- Wood, plastic & acrylic
- Phone cases, notebooks, signs & more
Not for fabric or clothing.
Care
A little care keeps your UV DTF looking new.
- Wait 24 hours after applying before washing
- Hand wash for best results, with mild soap and warm water.
- Don't scrub with rough pads
- Need the dishwasher? Top rack only, on a low-heat setting, away from direct spray. Avoid the microwave.
Shipping & turnaround
Printed fresh for every order, then packed and shipped.
- Ships within the Current TAT shown at the top of the site
- TAT is business days to prepare, print and shipTransit time is added after it ships
- Track your order any timeSee which step your order is on
- Need it sooner? Add Rush PrintingJumps to the front of the line, printed same or next business day


