Custom DTF Transfer "Single Image"
Get 1 or 100 of the same design by using our simple solution. Just add your file, select the length and width of your design, select the qty and we will take care of the rest. if you need multiple sizes of the same image you need to do the process for each size.
Upload PNG with Transparent Background
300 DPI
View Custom DTF FAQs for full artwork requirements.
We have a tiered wholesale structure on both transfers and blank apparel.
Transfers Wholesale: All Discounts Applied Automatically at Checkout
- 5% off when you spend $75
- 10% off when you spend $150
- 15% off when you spend $300
Blank Apparel Wholesale: All Discounts Applied Automatically at Checkout
- 5% off when you spend $100
- 10% off when you spend
When uploading a single image please ensure the following details are followed.
the Image needs to be 300 DPI to provide the best results.
Make sure your image is cropped and correct to the size you want.
If you send us a image file that is 11x15 but select 11x11 as your measurements we will adjust the image for the best results to not distort the orginal image.
Our DTF Transfers can be peeled Hot or Cold.
HOT PEEL INSTRUCTIONS
- Heat your heat press to 300 Degrees
- Pre-Press shirt to remove any wrinkles or moisture for 3-5 seconds
- Align your transfer
- Use heavy pressure and press for 8-12 seconds
- Use a quick motion to peel the transfer backing
- Do a second press using parchment paper or Teflon for 5 seconds
- You can experiment with different papers/fabrics to get the best feel/finish on your second press
COLD PEEL INSTRUCTIONS
- Heat your heat press to 300 Degrees
- Pre-Press shirt to remove any wrinkles or moisture for 3-5 seconds
- Align your transfer
- Use heavy pressure and press for 12-15 seconds
- Peel the transfer backing
- Do a second press using parchment paper or Teflon for 5 seconds
- You can experiment with different papers/fabrics to get the best feel/finish on second press
PLEASE NOTE: Not all heat presses are the same. Adjustments may need to be made as needed to get the desired finish/feel. We recommend starting with these instructions as a baseline. If you have any questions please reach out to us.